Recovering My Lumia From Bricked Emergency State

---

2 days ago, My Lumia 625 started to hang and keep making problems, and I finally decided to reset it through the WPRT. So I proceed to WPRT and connecting my L625 to PC and install the software as usual.But suddenly , WPRT shows an error that “The Operation could not be finished” and my L625 turns black and can’t restart and even no sign of the phone alive ( Light Exposure, red screen , etc).
So i check again with WPRT and it could not detect my L625 , so i decided to go to “My Phone Was not detected” button and choose my Device Manufacturer, Lumia

After that , once it detected my L625, it brings me to the Software Version checking…  Refer image below

Ok now i know that my Device is still alive and in UEFI mode or QHUSB_DLOAD (the name of the device at the moment) . Then i proceed by clicking Install Software.
It will take a moment to download the Emergency Packages from Microsoft Servers and soon it started to flash my L625 with the emergency package to recover / return to the Red Screen mode.

At first , i have tried to install the emergency package for about 10 times but it always ended up with error message ” The operation failed” “Could not found device”

That night, I try again and it succeed!. My Phone has been flashed with emergency package and return into normal UEFI mode ( The Red Screen with large NOKIA ) .
Then I proceed with software Installation, and again as expected, it failed again and ask me to reboot the device.So i try it and keep rebooting my device for around 3 times. You know what? Miracle happens…. I tried again while watching the Log Files in Temp Directory, and it started to install the software smoothly without the previous error.
Ok Let me Summarised it : Disconnect your phone from your PC Click on My Phone was not detected button Reconnect your phone to your PC If you were prompted to choose your Phone Manufacturer choose either Lumia, if you are using Lumia Devices or HTC if you are using HTC One. Wait for your computer to detect your phone and follow the screen instructions. If the phone still not connected try reboot it by pressing the combination of Power Key + Volume Down Key  Once you have been brought to Software Versions checking ( refer Screenshot 2 ) Press on Install Software and it will begin downloading emergency packages and Software Packages and install it. You’re done So far, in my case, i have not used any manual steps like install the Software via CMD Prompt using the suitable Hex for the phone etc…  I am grateful that my Lumia 625 back alive!
For more info on WPRT refer my last post or refer Microsoft Mobile Support Page

---