Balance Control Brembo Gets Set For 2019 Formula 1 Championship

---

Brakes are a funny thing. If you think about it, cars, especially performance cars, are about going, not stopping. But brakes actually help you go faster, not just slow you down. Brembo, the Italian brake component manufacturer has known this since day one, and they have been up to some interesting wizardry lately. That wizardry we will see in action when the 2019 Formula 1 season kicks off with the Australian Grand Prix on Sunday.
The Science of StoppingBrakes help you go faster like this: The longer you can stay on the gas, the faster you’re going to go, ergo, if you can use your brakes later and harder, you will, effectively, use them less. Brakes are, essentially, energy transformation devices. Since energy can only be changed, never destroyed, brakes take the kinetic energy of your car traveling forward, turn that kinetic energy into thermal energy, which is then dissipated away into potential energy.
The first designs, drum brakes, have pretty bad thermal efficiency. Disc brakes have much better thermal efficiency, which is why they can stop your car much quicker than drum brakes. Carbon-based brakes have greater thermal efficiency still, so they can stop your car in an even shorter distance. Disc brakes also have the added benefit of being lighter than drums; carbon brakes are even lighter yet, so it’s a paying proposition all the way around.
Brembo has been providing brakes for Formula One cars for 43 seasons. Brembo operates in 15 countries on three continents, with 24 production and business sites, and about 10,000 employees, 10 percent of whom are engineers and product specialists active in R&D. They have multiple championships under their belt (over 300 in Motorsports) and, as you would expect, all that performance goodness makes it to your car, eventually.
In 1975, Enzo Ferrari chose to have Brembo brakes fitted on his single-seater race cars. Today, Brembo is the official supplier of the Scuderia Ferrari F1 team. Pictured here is driver Charles Leclerc during day four of testing in Barcelona, Spain on February 21st, 2019. Photo: Ferrari S.p.A.
Customization Is KingAll Formula 1 cars these days use carbon composite brake discs. The discs are made up in a variety of ways. Carbon/carbon matrices, sintered carbon, carbon ceramic, you name it Brembo and their competitors like Lockheed and Hitco and Carbon Industries will go to great lengths to save a gram here and there, or get a few more degrees of temperature. The majority of the cars taking the grid for this weekend’s Australian Grand Prix will be running front discs that are 32 mm thick and rear discs that are 28 mm. That’s actually pretty big, considering a Grand Prix car weighs less than 1,400 lbs.
Like everything else in F1, customization is there for the asking. Depending on the temperatures a team expects during a Grand Prix and the given race strategy, each driver has three different options of Brembo discs to choose from. If you don’t want or need much cooling, you can fit your car with Brembo front discs with 800 holes in them. You can also get them with 1,250 holes or 1,480 holes. These holes come in radially, like spokes on a wagon wheel. The disc surface itself is smooth and invariable, allowing the maximum contact area between the brake pads and the disc itself.
Related: Very carefully: how Formula 1 teams move about the planet.
Pizza Ovens & City BlocksAll the cooling is handled by the internal cooling holes, and the carbon material itself. The thermal loads are immense. Carbon racing discs have a designed operating temperature up to 1,000 degrees Celsius. That is more than halfway to turning sand into glass. That’s about four times the temperature of a pizza oven. That is, in a word, hot.
However, given that you have 1,400 lbs. of car entering some corners well in excess of 200 mph; then having to slow it down to around 60 in less than a city block; and then hanging a hard right; well those temperatures start to sound reasonable. And remember: an F1 car does this for every corner; corner after corner for an entire race. It is an immense amount of kinetic energy to dissipate all at once.
Alongside Brembo technicians, each Formula 1 team defines the optimal ratio between the weight and stiffness of the individual brake calipers. The specific needs of the car are taken into account: some teams prefer lighter but less stiff calipers, while others will opt for both greater stiffness and greater weight. Photo: Ferrari S.p.A.
Aluminum-Lithium Alloy: Trial By FireThe Brembo brakes on these Formula 1 cars face a literal trial by fire even though they weigh only three to four lbs. This pursuit of lightness and durability extends to the calipers too, and Brembo has some new and very interesting tricks up their sleeve. They made the physical components as small as possible, but go further by making the calipers from aluminum-lithium alloy.
Aluminum-lithium alloy has been a holy grail for material engineers for a while now. Back in the late 80s, aerospace companies first started experimenting with it. Since lithium is the lightest metal out there (ringing it at #3 on the periodic chart – the only stuff that’s lighter is hydrogen and helium, and those aren’t even solid), if you could figure out how to combine it with other metals in an alloy, you would instantly get a huge weight savings.
There are, of course, downsides.
It’s a bear to manufacture, it’s a pain to machine, and it costs a lot. Hey, that $600 million a year budget for these teams has got to go somewhere. Anyway, Brembo is now supplying six-piston aluminum-lithium brake calipers to anyone who wants them. Turns out, seven out of the ten F1 teams decided to go this route.
Special senors relay temperature information on the discs and calipers back to Formula 1 teams in real time. This allows them to properly calculate disc and pad wear, while helping drivers adjust the brake balance of their car. Photo: Brembo SpA.
The @BremboBrakes on these @F1 #cars face a literal trial by fire even though they weigh only three to four lbs.
Click To Tweet

Ground Down To DustEach team orders from 10 to 15 sets of Brembo calipers per year on average. This gives you a proper amount of spares over the season, but generally speaking, the calipers themselves don’t wear out very fast, even though they are operating at a temp just shy of your oven: 392°F (200°C).
The pads and discs themselves are a whole different matter. They work amazingly well, but for an amazingly short time. Both are completely used up by the end of a 200-mile race. The pads are ground down into dust and the discs are ablated down to nearly their cooling holes. Running the brakes too hard can literally destroy the discs, rendering them into a form that looks like black string cheese, if not outright exploding. During a season, Brembo supplies each team between 150 and 300 discs and up to 600 brake pad sets.
No, that is not cheap either, with a full set of discs and pads running around $15,000 per car.
But, like F1 champion Graham Hill famously said, “Speed equals money sir. How fast do you care to go?”
Tony Borroz has spent his entire life racing antique and sports cars. He is the author of Bricks & Bones: The Endearing Legacy and Nitty-Gritty Phenomenon of The Indy 500, available in paperback or Kindle format. Follow his work on Twitter: @TonyBorroz. 
Brembo Formula 1 InfographicsThese graphics illustrate the main components of the Brembo brake systems used in Formula 1. Each graphic is accompanied by a more detailed technical description from Brembo, which can be found here.
Brake Discs
Brake Pads
Evolution of Discs
Carbon Ceramic Brake Discs
G-Force
Photos: Brembo SpA, Ferrari S.p.A.
Infographics: Brembo SpA.


from Automoblog.net https://ift.tt/2XZiLac

---